|
|
Post by stanscabs on Jan 13, 2010 16:52:05 GMT -5
Does anyone know of a mop-style sander that will go on the accessory shaft? I certainly don't want the additional expense of hanging a bracket and motor off the back end for the amount I have to do. Plus the hood of the Woodmaster is a natural for collecting the dust.
|
|
|
|
Post by justin on Jan 14, 2010 22:50:37 GMT -5
I haven't seen anything like that but I do use the mop sander that woodmaster sells. If you wanted to make something and not spend a lot, you could mount a mop sander on a shaft supported by pillow blocks on the outfeed table and run it off of the planer shaft.
Justin
|
|
|
|
Post by fishhh4 on May 20, 2010 10:49:48 GMT -5
How does the mop sander do ? I have been considering one for a while , but have yet found anybody that owns one.
|
|
|
|
Post by justin on May 20, 2010 18:20:48 GMT -5
not bad, I don't have the base that mounts to the power platform. I use the woodmaster mop sander mounted to a motor shaft that I bolt to my outfeed table. I'm super cheap!!
Justin
|
|
|
|
Post by cooner1 on May 21, 2010 18:22:01 GMT -5
|
|
|
|
Post by justin on May 21, 2010 21:44:30 GMT -5
The ones from Flap-Wheel look much better the woodmaster mops.
Justin
|
|
|
|
Post by ahimocoxawezo on Nov 1, 2019 17:47:20 GMT -5
|
|
